Installing Add-On Cards - ECS P4S5MG/GL+ Manual

Installing Add-on Cards

This mainboard has two 32-bit PCI (Peripheral Components Interconnect)
expansion slots, one 4xAGP slot, and one AMR (Audio Modem Riser) slot.
AGP Slot
The 4xAGP slot is used to install a graphics adapter that supports the
4xAGP specification and has a 4xAGP edge connector.
Note: The above layout is for reference only. The AGP slot
may be different from your mainboard. Please refer to
actual shipment.
PCI Slots
PCI slots are used to install expansion cards that have the 32-bit PCI
interface.
AMR Slot
The AMR (Audio Modem Riser) slot is an industry standard slot that
allows for the installation of a special audio/modem riser card. Differ-
ent territories have different regulations regarding the specifications
of a modem card. You can purchase an AMR card that is approved in
your area and install it directly into the AMR slot.
Note: Before installing an add-on card, check the documentation for the card
carefully. If the card is not Plug and Play, you may have to manually con-
figure the card before installation.
18