Canon imagePROGRAF iPF825 Basic Guide No.3 Basic Manual page 9

Large-format printers

Hide thumbs Also See for imagePROGRAF iPF825 Basic Guide No.3:

Table of Contents

Reinstalling the Printer

Install the output stacker

When installing the Stationary Output Stacker , refer to the

Printer Stand Setup Guide .

When installing the Wheeled Output Stacker , refer to the

Wheeled Output Stacker Setup Guide .

Attach the media take-up unit (iPF815: optional)

Referring to the Setup Guide included with the Media Take-up

Unit , attach the Media Take-up Unit .

Remove the packaging material

Remove tape and packaging material attached to the printer. Also

open the Top Cover and remove stoppers and spacers inside the

printer.

Table of Contents

Need help?

Do you have a question about the imagePROGRAF iPF825 Basic Guide No.3 and is the answer not in the manual?

Imageprograf ipf815 Imageprograf ipf815 mfp m40