Canon PIXMA iX7000 Series Getting Started page 47

10
When the Printers dialog box appears, select the
printer, then click Next.
• If the printer is not detected, make sure of the following, click
Update.
− The printer is turned on.
− The printer is connected to the network device with the
LAN cable.
• Some programs that switch the network environment
depending on your system environment will enable a firewall
by default. Check the settings of any such software.
11
When the Setup Completion dialog box appears,
click Finish.
• To change the port name, click Set Port Name. For
details, refer to "Changing the Port Name" in the printed
manual: Network Setup Troubleshooting.
Windows Macintosh
12
When the Print Head Alignment screen
appears, click Next.
Go to the next step without performing Print Head
Alignment.
Follow any on-screen instructions to proceed with the
installation.
To Use the Printer by Connecting to a Computer