USB Connection
□
If the Found New Hardware or
Found New Hardware Wizard
dialog box appears:
If you connect a USB cable to the
printer before installation of the
drivers, this screen appears.
1
Remove the USB cable
connected to your computer.
The dialog box may close. In this
case, proceed from step .
2
Click Cancel to quit the
dialog box.
3
Proceed from step .
To Use the Printer by Connecting to a Computer
□
For Windows Vista/XP
If you are using Internet
Explorer 7 or later, you
can use the Web print
software Easy-WebPrint EX.
An internet connection is
required for installation. (It is
also possible to install this
software later.)
1
1
A
TURN OFF THE PRINTER (A).
•
It takes about 1 minute until the
printer turns off.
Connect the printer to the
computer with a USB cable.
Make sure the printer is turned on.
•
The USB Port is located on the right
side at the back of the printer. The
lower port is for USB.