Technical Data; Unpacking; Layout - Scheppach HF60 Translation Of Original Instruction Manual

• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Furthermore, despite all precautions having been met,
some non-obvious residual risks may still remain.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with the
operating manual as a whole are observed.
• Avoid accidental starting of the machine: the oper-
ating button may not be pressed when inserting the
plug in an outlet. Use the tool that is recommended
in this operating manual. This is how to ensure that
your machine provides optimum performance.
• Keep your hands away from the working area when
the machine is in operation.
7.

Technical data

Dimensions L x W x H
Table size L x W
Table height
Table width extension
dimensions
L x W
Height adjustment spindle
Table insert rings
Spindle speed
Max. cutter Ø
Weight
Engine
Rated input
Protection category
Protection class
Technical changes reserved!
Noise and vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
Noise data
The noise levels have been determined in accordance
with EN 61029.
Sound power level L
WA
Sound pressure level L
pA
Uncertainty K
wa/pA
30 | GB
1030 x 360 x 311 mm
610 x 360 mm
311 mm
210 x 360 mm
0 - 40 mm
Ø 32 / 47 / 55 mm
11,500 - 24,000 rpm
Ø 50 mm
21 kg
230 - 240 V~ / 50 Hz
1500 W
IP20
I
102 dB(A)
89 dB(A)
3 dB
www.scheppach.com

8. Unpacking

• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating instructions before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
• When ordering please provide our article number as
well as type and year of manufacture for your equip-
ment.
m WARNING!
The device and the packaging material are not
children's toys! Do not let children play with plas-
tic bags, films or small parts! There is a danger of
choking or suffocating!
9.

Layout

m Attention:
Disconnect the mains plug before carrying out any ad-
justment or maintenance work.
Fastening the machine
For use, it is recommended to fix the machine on a
workbench by means of the four holes.
1 The mounting surface must be pre-drilled, taking
into account the spacing of the two mounting holes
in the frame.
2 Each attachment point must be tightened securely
using screws (not supplied).
3 The screws must be long enough: Take the thick-
ness of the work surface into account on which
the machine is mounted.
4 Use the washers and screw to the work surface
with the nuts.
5 The work surface must be large enough to prevent
the unit from tilting during work.