Handling The Original Document - Canon Pixma MP520 series Quick Start Manual

Turning off the Machine
1
To turn off the machine, press the ON/OFF
button.
When the Power lamp stops flashing, the machine
is turned off.
Important
About the Power Plug
When removing the power plug after turing off the
machine, be sure to confirm that the Power lamp is
not lit. If the power plug is removed from the wall outlet
with the Power lamp still lit or flashing green, the
machine may become unable to print.
See "Keeping the Best Printing Results" on page 49.
The Screen-saver Mode
The LCD goes out if the machine is not operated for about five minutes*.
* You cannot change the wait time before the LCD goes out.
Note
When you want to restore the display, perform a print operation or press any button except for the
ON/OFF button. When you press the ON/OFF button while the machine is in Screen-saver mode,
the machine turns off.

Handling the Original Document

This section describes how to load the original document on the Platen Glass.
Original Document Requirements
The original documents you load on the Platen Glass for copying or scanning must meet these
requirements:
Document
type
Size (W x L)
Height
Paper documents
Photographs
Books
Max. 8.5 x 11.7 inches / 216 x 297 mm
Max. 0.59 inches / 15 mm
Before Using the Machine 5