Clock And Led; Figure 3: Expansion Connectors - Mistral OMAP35 Series Hardware User's Manual

OMAP35x Evaluation Module

2.1.14 Clock and LED

The EVM Main Board provides following clocks,
• 26MHz Clock for TPS65950 High Frequency HFCLKIN
• 25MHz Clock for Ethernet controller
• 26MHz Clock for ISP1507 USB transceiver
• 24MHz Clock for the on-board LI camera module
The following status LED's are present on the Main Board
• D1 – To Indicate MMC1 3V/MMC1 1.8V Enabled
• LD1 – To indicate Full Duplex mode for Ethernet
Figure 3: Expansion Connectors
Hardware User Guide
29