Table of Contents
Advertisement
1.3
Key Features
The key features are:
•
Texas Instruments' OMAP 3530 high performance applications processor
based on the enhanced OMAPTM 3 architecture.
•
Memory
o
•
Power Module based on TPS65950 power management and audio
companion device
•
3.7" dual mode (QVGA/VGA) LCD display with Touch Screen support
•
CVBS and S-Video TV OUT interfaces
•
High Speed USB OTG 2.0 interface using external transceiver ISP1507
from NXP
•
High speed USB Host interface (USB2 port) using external transceiver
USB3320 from SMSC
•
10/100 Mbps Ethernet interface
•
Stereo Audio Interface – Auxiliary Line IN and Headset OUT
•
1/4/8 bit SD/MMC interface
•
4x4 Keypad Interface
•
Three RS-232 UART interfaces (multiplexed on two ports)
•
Dip switch to select Boot mode configurations
•
Video Input options on camera interface port of OMAP (Either 1/2/3 shall
be active at anytime)
1. Video Encoder TVP5146
2. Camera Interface from 26-Pin Micron Connector
3. Provision for plugging the LI-3M02CM camera module from
Micron PoP memory supporting 2Gbit NAND flash and 2Gbit Mobile
DDR SDRAM (64M x 32 bus width and 166 MHz maximum operating
frequency)
a. S-Video Input
b. Composite Video Input
c. Component Video Input
Leopard Imaging.
Hardware User Guide
Advertisement
Table of Contents
