Software Installation - Canon PIXMA iP2600 Series Setup Instructions

3

Software Installation

Note
• The screens below refer to Windows Vista™ operating system Ultimate Edition
(hereafter referred to as "Windows Vista") installation.
Screens may vary depending on the operating system you are using.
• Log into a user account with the administrator privilege.
• Do not switch users during the installation process.
• Quit all running applications before installation.
• A message asking for your confirmation to restart your computer may appear during
the installation process. If this message is displayed, follow the on-screen instructions
and click OK.
The installation resumes from where it left off when your computer has been restarted.
• If the computer is restarted during installation, do not remove the Setup CD-ROM
during restarting.
a Be sure to TURN THE PRINTER OFF before continuing.
(1) Press the Power button.
(2) Make sure that the Power lamp stops flashing.
b Turn the computer on and start Windows ® .
Important
If the Found New Hardware or Found New Hardware Wizard screen appears auto-
matically, remove the USB cable connected to your computer. Click Cancel to quit
the screen. In Windows Vista, the screen may close automatically when the USB
cable is unplugged. Then turn off the printer and proceed from step c to install
the software.
Insert the Setup CD-ROM. The setup program should run
c
automatically.
In Windows Vista, go to Step d. In Windows XP and Windows 2000, go to
Step f.
Note
If installation does not start automatically, double-click the CD-ROM icon
MSETUP4.EXE contained on the Setup CD-ROM.
If the AutoPlay screen appears, click Run Msetup4.exe.
d
If the User Account Control screen appears, click Continue.
e
If the same screen reappears in subsequent steps, click
Continue.
f When the main menu appears, click Easy Install.
The printer driver, On-screen Manuals, and application software are installed
automatically.
Note
• If you want to select particular items to install, click Custom Install and follow the on-
screen instructions to proceed with the installation.
• To install Adobe RGB (1998), click Custom Install and follow the instruction on the
®
screen.
g When the list of software to install appears, confirm the contents,
click Install.
Note
Move the cursor over items to display explanations of each application.
"Microsoft" is a registered trademark of Microsoft Corporation. "Windows" is a trademark of Microsoft Corporation, registered in the U.S. and other countries. "Windows Vista" is a trademark of Microsoft Corporation. "Macintosh" and "Mac" are trademarks of Apple Inc., registered in the U.S. and other countries. "Adobe" and "Adobe RGB (1998)" are either registered trademarks or trademarks
of Adobe Systems Incorporated in the United States and/or other countries.
h Read the License Agreement carefully and click Yes. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the software.
When the Printer Connection screen appears, connect one
i
end of the USB cable to the computer, the other to the printer,
then TURN THE PRINTER ON. The printer driver will begin
identifying the printer port being used.
Important
If you cannot go to the next procedure after two minutes, refer to
"Troubleshooting" instructions in the User's Guide on-screen manual.
USB
When the Print Head Alignment Recommended screen
j
appears, click Next.
k When the Installation Results screen appears, click Next.
or
When the User Registration screen appears, click Next.
l
Note
To register later, click Cancel and go to Step . After software installation is complete,
m
double-click on the desktop.
Follow on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the printer.
Serial Number
When the PIXMA Extended Survey Program screen appears,
m
confirm the message. We would appreciate it if you would take
part in this program regarding the use of Canon printers. If you
can agree, click Agree.
If Do not agree is clicked, the PIXMA Extended Survey Program will not be
installed but you can use the printer normally.
When the Installation completed successfully screen
n
appears, click Exit. Remove the Setup CD-ROM after clicking
Exit.
If Restart is displayed, make sure that the Restart the system now
(recommended) check box is selected, then click Restart.
Remove the Setup CD-ROM after restarting the computer.
Note
Keep the Setup CD-ROM in a safe place in case you need to reinstall the software.
Software installation is now complete.
Note
• Since Mac ® OS 9, Mac OS X Classic environments, or Mac OS X v.10.3.8 or earlier are
not supported, do not connect the printer to these. Use Mac OS X v.10.3.9 or later.
• The screens below refer to Mac OS X v.10.4.x installation. Screens may vary
depending on the operating system you are using.
• Log on as an Administrator.
• Quit all running applications before installation.
a Connect one end of the USB cable to the computer, the other to
the printer.
Note
Make sure the printer is turned on.
→
To Computer
USB
b Turn on your Mac and insert the Setup CD-ROM.
Note
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon
the desktop.
c Double-click the Setup icon.
When the Authenticate screen appears, enter your
d
administrator name and password. Click OK.
If you do not know your administrator name or password, click
, then follow the on-screen instructions.
e When the main menu appears, click Easy Install.
The printer driver, On-screen Manuals, and application software are installed
automatically.
Note
If you want to select particular items to install, click Custom Install and follow the on-
screen instructions to proceed with the installation.
f When the list of software to install appears, confirm the contents,
then click Install.
Note
Move the cursor over items to display explanations of each application.
g Read the License Agreement carefully and click Yes. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the software.
When the Print Head Alignment Recommended screen
h
appears, click Next.
i When the Setup Complete screen appears, click Next.
3
Software Installation
j When the User Registration screen appears, click Next.
Note
To register later, click Cancel and go to Step
double-click on the desktop.
Follow on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the printer.
When the Installation completed successfully screen
k
appears, click Restart.
Remove the Setup CD-ROM after restarting the computer.
on
The system is restarted automatically.
Note
Keep the Setup CD-ROM in a safe place in case you need to reinstall the software.
Software installation is now complete.
k . After software installation is complete,
Serial Number