Table of Contents
Advertisement
Operations
Control panel
01 Cycle Selector
02 Display
03 Temp.
04 Rinse
05 Spin
06 Soil
07 Bubble Soak
08 Add Garment
09 Delay End
Untitled-1 29
02
01
Turn the dial to select a cycle.
The display shows current cycle information and estimated time
remaining, or an information code when a problem occurs.
Press to change the water temperature for the current cycle.
Press to change the rinse count for the current cycle. You can set the
rinse count to a max of 5, depending on the cycle.
• Rinse only: Press and hold Rinse for 3 seconds.
Press to change the spinning speed for the current cycle.
• Spin Only: Press and hold Spin for 3 seconds.
Press to change the soil level for the current cycle.
• High (Level 5): For extremely soiled loads.
• I (Level 4): For heavily soiled loads.
• Normal (Level 3): For moderately soiled loads. This setting is best for
most loads.
• I (Level 2): For lightly soiled loads.
• Light (Level 1): For barely soiled loads.
Press to activate/deactivate the Bubble Soak function. This function
helps remove a wide variety of stubborn stains.
Use this function to add laundry after the wash starts.
Delay End lets you set the end time of the current cycle. Based on your
settings, the start time of the cycle will be determined by the machine's
internal logic. For example, this setting is useful for programming your
machine to finish a wash at the time you normally return home from
work.
• Press to choose a preset unit of hours.
07
08
03
04
05
06
09
11
10
12
English 29
2022-01-19
3:51:25
Advertisement
Table of Contents
