Samsung WF17T6000 Series User Manual page 52

Troubleshooting
Code
Check the spinning process.
• The load may not be balanced inside the drum. Check the drum and make sure the
UB
load is balanced.
• Press Start/Pause (Hold to Start) to resume operation or power the washing machine
off, wait 2-3 minutes, power the washing machine on, and then try again.
Check the MEMS sensor.
8C, 8C1, 8C2
• Power the washing machine off. Wait 2-3 minutes, power the washing machine on,
and then try again.
Water may overflow.
OC
• Close the water valve and call for service.
Check the motor.
3C
• Power the washing machine off. Wait 2-3 minutes, power the washing machine on,
and then try again.
Check the PBA communication status.
AC6
• Power the washing machine off. Wait 2-3 minutes, power the washing machine on,
and then try again.
The electronic control needs to be checked.
9C1, 9C2
• Check if power is supplied properly.
• If the information code remains, contact a Samsung service center.
System failed.
SF
• Power off the washing machine, and then contact a Samsung service center.
If any information code keeps appearing on the screen, contact a local Samsung service center.
52 English
Untitled-1 52
Action
2022-01-19 3:51:28