Checking Connection Information - Canon PowerShot SX150 IS User Manual

Using an Eye-Fi Card

Checking Connection Information

You can check the Eye-Fi card's access point SSID, or connection status.
Disabling Eye-Fi Transfer
You can set the card to disable Eye-Fi transfer.
What if [Eye-Fi Settings] does not appear?
[Eye-Fi Settings] will not appear when an Eye-Fi card is not inserted in the
camera, and when an Eye-Fi card's write-protect tab is in the locked position. For
this reason, settings cannot be changed for Eye-Fi cards equipped with a write-
protect tab when the tab is in the locked position.
166
Choose [Connection info].
Press the n button to choose [Eye-Fi
Settings] in the 3 tab, then press the m
button.
Press the op buttons or turn the 5 dial
to choose [Connection info], then press the
m button.
The connection info screen will appear.
Choose [Disable] in [Eye-Fi trans.].
Press the n button to choose [Eye-Fi
Settings] in the 3 tab, then press the m
button.
Press the op buttons or turn the 5 dial
to choose [Eye-Fi trans.], then press the
qr buttons to choose [Disable].