Canon PowerShot SX150 IS User Manual page 145

Select Range
Choosing Images for Printing (DPOF)
Choose an image.
Press the qr buttons or turn the 5 dial to
choose an image, then press the m
button.
You will be able to set the number of print
copies.
If you choose images in [Index],
appears on the screen. Press the m
button again to deselect the image.
disappear.
Set the number of prints.
Press the op buttons or turn the 5 dial
to set the number of prints (maximum 99).
Repeat Steps 2 and 3 to choose other
images and the number of prints for each.
You cannot set the number of copies for
index prints. You can only choose which
images to print (as shown in Step 2).
Press the n button to complete the
setting and restore the menu screen.
Choose [Select Range].
Follow Step 1 on p. 144 to choose [Select
Range], then press the m button.
Choose images.
Follow Steps 2 – 3 on p. 121 to choose
images.
Make print settings.
Press the op buttons to choose [Order],
then press the m button.
will
145