Editing - Canon PowerShot SX150 IS User Manual

Editing

You can trim the beginnings and ends of recorded movies.
Movie Editing Panel
Movie Editing Bar
Choose *.
Follow Steps 1 – 3 on p. 32 to choose *,
then press the m button.
The movie editing panel and the movie
editing bar will appear.
Set the editing range.
Press the op buttons to choose
.
If you press the qr buttons or turn the 5
dial to move
where the movie can be edited. If you
choose , you can trim the beginning of
the movie from
can trim the end of the movie from
Even if you move
, only the portion from the nearest
to the left will be trimmed when
chosen. Only the portion from the nearest
to the right will be trimmed when
chosen.
Check the edited movie.
Press the op buttons to choose
press the m button. The edited movie will
play.
To edit the movie again, repeat Step 2.
To cancel editing, press the op buttons
. After pressing the m
to choose
button, press the qr buttons or turn the
5 dial to choose [OK], then press the m
button again.
, will appear at points
. If you choose
to a point other than a
or
, you
.
is
is
, then
109