Auto Exposure Bracketing (Aeb Mode) - Canon PowerShot S80 User Guide Advanced User Manual

Auto Exposure Bracketing (AEB Mode)

Mode Dial
The camera automatically takes three shots: one with standard exposure and
one each with positive and negative compensation.
You can adjust AEB settings in 1/3 stops within ±2 EV of the standard
exposure setting. AEB settings can be combined with exposure compensation
settings (p. 69) to extend the adjustment range. The images are recorded in
the following order: Standard exposure, underexposure and overexposure.
The three shots are taken at the same interval as continuous shooting.
See Continuous Shooting (p. 40).
1
From the FUNC. menu, select
(BKT-OFF).
* The current setting is displayed.
2
Use the or
(AEB), press the MENU button and
adjust the compensation range with
the or
Settings can be made by turning the multi
control dial.
Pressing the
compensation, and pressing the
You can shoot the image right after selecting settings by pressing the
shutter button. The menu displays again after the shot, allowing you to
change the settings easily.
Select (BKT-Off) to cancel the AEB mode.
The AEB mode cannot be used for flash photography. If the flash fires,
only one standard exposure image gets recorded.
Three images are shot continuously regardless of the continuous
shooting setting (p. 40).
button to select
button.
button increases the
*
button decreases it.
4
75