Chapter 7 Vewing Images On A Tv Set; Viewing Images On A Tv Set - Canon PowerShot S80 User Guide Advanced User Manual

Vewing Images on a TV set

Viewing Images on a TV Set

You can use a video-compatible television as a monitor to shoot or
play back images when it is connected to the camera with the
supplied AV Cable AVC-DC300.
1
Turn off the camera and the TV.
2
Connect the AV Cable to the
camera's A/V OUT terminal.
Slide the camera's DIGITAL terminal
cover in the direction of the
and plug the AV Cable in all the way.
3
Plug the other ends
of the A/V Cable into
the VIDEO IN and
AUDIO IN jacks on
the TV.
4
Turn on the TV and switch it to Video mode.
5
Power on the camera in Shooting mode or Playback
mode.
The image will appear on the TV. Shoot or play back images as usual.
Press the DISP. button when images are not being displayed on the TV
when shooting.
No image will appear on the LCD monitor when the camera is
connected to a TV monitor.
If the TV is a stereo model, you can plug the audio plug into either the
left or right Audio In jack. Please refer to the TV's manual for details.
Refer to (p. 31), for instructions regarding the video output signal.
A TV set cannot be used in the
112
to open it,
(Stitch Assist) mode.
To the Video IN Jack
Plug (Yellow)
To the Audio IN Jack
Plug (Black)