Flash Intensity - Canon PowerShot S80 User Guide Advanced User Manual

1
Select (Flash or Flash Output)
from the FUNC. menu.
The available settings are displayed.
2
Use the or

flash intensity.

Settings can be made by turning the multi control dial.
You can shoot the image right after selecting settings by pressing the
shutter button. The menu displays again after the shot, allowing you to
change the settings easily.
The flash fires with automatic adjustments when [Flash Adjust] is set to
[Auto] in the Rec. menu. Automatic adjustment sets the flash intensity.
When shooting in
flash fires with the manually set adjustments. For manual flash, you set
flash intensity in advance.
When [Flash Adjust] is set to [Auto], the flash fires twice. A pre-flash
will fire and will be followed by the main flash. The pre-flash is used by
the camera to obtain the subject's exposure data so that the main flash
can be set to the optimal intensity for the shot. However, the pre-flash
does not fire when shooting with FE Lock enabled (p. 67).
78
button to adjust the compensation or
mode, or with [Flash Adjust] set to [Manual], the
e.g. [Flash Adjust] set to
[Auto]
e.g. [Flash Adjust] set to
[Manual]