Switching the Timing at which the Flash Fires
Mode Dial
The flash fires right after the shutter opens, regardless of the shutter
1st-curtain
speed.Usually, the 1st-curtain is used when shooting.
The flash fires right before the shutter closes. Compared with the 1st-curtain,
2nd-curtain
the flash fires later and this allows you to shoot images in which, for example, a
car's lights seem to trail off behind.
Image shot with the 1st-
curtain setting
1
Select [Flash Sync] from the [
(Rec.)] menu.
See Selecting Menus and Settings (Basic
Guide: p. 16).
2
Use the
or
curtain].
Settings can be made by turning the multi control dial.
Image shot with the 2nd-
curtain setting
button to select [1st-curtain] or [2nd-
4
79