BenQ GW2760HL User Manual page 33

Item
Slightly enlarges the input image. Use this feature to hide annoying
Overscan
edge noise if present around your image.
Available only when the input source is HDMI or D-Sub (VGA converted
from Component).
This feature is provided to allow aspect ratios other than 16:9 to be
Display
Mode displayed without geometric distortion.
The options under
signal sources.
Depending on your selection of
option is pre-set. Change the setting if needed.
Full
Aspect
Determines the color space (
Color
video signal.
Format
You might need to manually set the
monitor screen do not display properly.
If the input source is HDMI, color format is not selectable. In other words,
Color Format
RGB
YUV
Determines the range of color scales. Select an option that matches
HDMI RGB
the RGB range setting on the connected HDMI device.
PC Range
Function
will be different depending on the input
Display Mode
Picture Mode
Scales the input image to fill the screen. Ideal for 16:9
aspect images.
The input image is displayed without geometric
distortion filling as much of the display as possible.
or
RGB
Color Format
is automatically set depending on the input video source.
• For D-Sub (VGA) input source from PC.
• For DVI input source.
For D-Sub (Component converted from VGA) input
source from a video device.
, different
Display Mode
) based on the detected
YUV
if colors shown on the
Range
• ON
• OFF
•
Auto
Detect
• (0 ~
RGB
255)
• (16 ~
RGB
235)
Navigating the main menu 33