Connecting To A Computer - Canon LV-7490 User Manual

Installation
Cables used for connection
• VGA Cables (Mini D-sub 15 pin) *
• Audio Cables
(*One cable is supplied; other cables are not supplied with the projector.)
 Note:
Unplug the power cords of both the projector and external
equipment from the AC outlet before connecting cables.
External Audio Equipment
Audio Input
This terminal is
switchable. Set up
the terminal as either
Audio cable
Computer input or
(stereo)
Monitor output.
(See Page 51.)
AUDIO OUT
(stereo)
 Note:
• When the MIC function is set to Off in the Sound menu, the MIC function is disabled. (p 26)
• When MIC is set to On in Sound Menu, COMPUTER AUDIO IN 1, COMPUTER AUDIO IN 2 / MIC IN and AUDIO
IN(L/R) terminals can be connected at the same time. At this time, COMPUTER AUDIO IN 2 terminal as MIC
input. (p 26)
• Input sound to the COMPUTER AUDIO IN 1, COMPUTER AUDIO IN 2 / MIC IN terminals when using the
COMPUTER IN 2 / MONITOR OUT and the COMPUTER IN 1/ COMPONENT IN terminal as input.
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
• When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 / COMPONENT IN and not
the COMPUTER IN 2/ MONITOR OUT.
16
Connecting to a Computer
Monitor Input
Monitor Output
VGA
cable
COMPUTER MONITOR
IN 2 OUT
Monitor Output
VGA
VGA
cable
cable
COMPUTER IN 1 /
COMPONENT IN
Audio Output
Audio cable
(stereo)
COMPUTER 1/
COMPUTER 2
AUDIO IN (PC or MIC)