Canon LV-7490 User Manual page 48

Setting
Background
Select the background screen for when no input
signal is detected. Press the Point ▲▼ buttons
to switch between each option.
blue........Project a blue background.
User........Project an image captured in the Logo
setting.
Black......Project a black background.
Display
This function decides whether to display
On-Screen Displays.
On ........................ Show all the On-Screen
displays. Use this function
when you want to project
images after the lamp
becomes bright enough. The
factory default setting is in
this option.
Countdown off ... Show the input image
instead of the countdown
when turning on the
projector. Use this function
when you want to project the
image as early as possible
even when the lamp is not
bright enough.
Off ........................ Hide the On-Screen
Displays except;
● On-Screen Menu.
● Power off? (p. 22)
● P-Timer display.
● No signal for Power
● Please wait ...
● Arrows for the True
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen
logo with Logo select, Capture, Logo PIN code
lock and Logo PIN code change functions.
Note:
When On is selected in the Logo PIN code lock
function, Logo select and Capture functions
cannot be selected.
Logo select
This function decides on the starting-up
display from among following options.
User ....... Show the image you captured.
Default ... Show the factory-set logo.
Off .......... Show the countdown display only.
48
management (p. 51)
function in the Screen
Menu. (p. 36)
Logo select