Reset
To reset the adjusted data, select Reset and
press the OK button. A confirmation box appears
and then select Yes. All adjustments will return
to their previous figures.
Mode free
To clear the stored data, select Mode free and
then press the Point ► button or the OK button.
Move the highlight to the Mode that you want to
clear and then press the OK button.
Store
To store the adjusted data, select Store and
then press the Point ► button or the OK button.
Move the highlight to one of the Modes 1 to 10
in which you want to store, and then press the
OK button.
Note:
• Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is selected in the
PC System Menu (p.30).
• When input computer signal to the projector, PC adjust will become available.
Mode free
Values of Total dots, Horizontal
position, Vertical position, Display area
H, and Display area V.
Store
Press MENU
button to close this
dialog box.
Computer Input
This Mode has stored
parameters.
Vacant
Press the OK button to
store the data.
33