Jumper Settings; Clear Cmos Data (Jp1) - DFI CS181 User Manual

X Jumper Settings

Clear CMOS Data (JP1)

DCIN_19V
DP_HDMI
DPA/DPB
DPC/DPD
USB3_1/2
USB2_1/2
USB3_3/4
USB2_3/4
LAN2
LAN3/4
M2JP204
1
MXM3.1-B
10
9
DIO Power
SYS_FAN
1
2 1 1
11
13 1
1
1 8
DIO
14 2
User's Manual | CS181
JP1
CPU_FAN
1 1
1
Socket LGA1151
CN59.G3
1
DPJP202
1
DPJP203
1
10
2
1
2
1
CN59.G4
Front Panel
DPJP201
SATA0(R3) SATA1(R2) 1 2
1
1 2
1
1 1
2
MADE IN TAIWAN
Function Block
Normal (default) 1-2 On
Clear CMOS Data 2-3 On
If any anomaly of the followings is encountered —
• a) CMOS data is corrupted;
• b) you forgot the supervisor or user password;
• c) failure to start the system due to BIOS mis-configuration
— it is suggested that the system be reconfigured with default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
• 1. Power-off the system and unplug the power cord.
• 2. Put a jumper cap on pin 2 and pin 3. Wait for a few seconds and set it back to its
default setting, i.e. jumper cap on pin 1 and pin 2.
• 3. Plug the power cord and power-on the system.
Chapter 2
HARDWARE INSTALLATION
14