Table of Contents
Advertisement
...6 PROGRAMMING
6.2.8 Calibration User Code Page
The calibration user code is required to gain access to the Set Up Temperature Control and Calibration Pages. The access code
can be altered in the Calibration Page, if required – see Section 6.2.11.
-----
CAL USER CODE
or
Incorrect Code
Correct Code
SET UP TEMP. CONTROL
or
Carbon Dioxide <Unit>
26
Calibration User Code
Set the correct user code.
Advance to next programming page.
Set Up Temperature Control Page.
or
Return to Operating Page 1.
Advertisement
Table of Contents
