Page 4
AKKU UND BATTERIEN EINLEGEN | BATTERY INSTALLATION draufdrücken und die Abdeckung ö nen | unclick and open the cover Für den Hai wird ein 3,7V 300mAh Akku benötigt (inklusive). Insert the 3.7V 300mAh battery (included) into the shark . Für die Fernsteuerung werden 2 x 1,5 V Alkaline AAA LR03-Batterien benötigt.
Page 5
Wenn die linke und die rechte LED gleichzeitig blinken (25 Sekunden lang), zeigt dies an, dass die Fernbedienung zum Binden bereit ist. - Legen Sie den Akku in den Hai ein, stellen Sie den EIN/AUS-Schalter auf ON und der Sharky verbindet sich automatisch mit der Fernsteuerung.
Page 6
- While pairing, put the RC Sharky and remote controller as close it can be - The RC Sharky has the function of sensing water. The motor will stop once the shark is taken out of the water...
Need help?
Do you have a question about the SHARKY and is the answer not in the manual?
Questions and answers