FAX SETTINGS
6. RX TERMINAL ID
7. RX RESTRICTION
OFF
ON
5 PRINTER SETTINGS
1. RX REDUCTION
ON
OFF
CUT
2. 2-SIDED PRINT
3. CONT. PRINTING
Sets whether to insert the machine's fax number and the sender
information on received faxes.
OFF
–
–
ON
You can reject faxes from senders with no fax/telephone
number in their sender information. (See Chapter 4, "Sending
and Receiving," in the Reference Guide.)
All receptions are conducted.
Receives the fax only from the sending fax machine that sends
the TSI signal.
Sets the printer functions.
Sets whether to reduce or truncate the image when a faxed
page is larger than the size of paper loaded. (See Chapter 4,
"Sending and Receiving," in the Reference Guide.)
Reduces the image to fit on the size of paper loaded.
Retains the original size of the image.
The image that is larger than 1-page record area is cut and not
recorded.
Sets the type of two-sided printing for faxing. (See Chapter 4,
"Sending and Receiving," in the Reference Guide.)
–
OFF
–
ON
Sets whether to continue printing when toner has run out. This
function is only for printing fax documents and reports. (See
Chapter 4, "Sending and Receiving," in the Reference Guide.)
OFF
–
–
ON
12-13