Canon imageCLASS MF4270 Basic Operation Manual page 225

FAX SETTINGS
2. DRPD:SELECT FAX
3. INCOMING RING
ON
RING COUNT
OFF
4. REMOTE RX
ON
REMOTE RX ID
OFF
5. RX PRINT
MEMORY RX
PRINT RX
12-12
Selects the ring pattern for fax calls.
NORMAL RING
–
– DOUBLE RING
– SHORT-SHORT-LONG
– SHORT-LONG-SHORT
– OTHER RING TYPE
Sets whether or not to activate the ring alert of the external
telephone if <RX MODE> is set to <FaxOnly>.
Selecting <ON> allows you to learn the fax reception and
answer voice calls if you pick up the external telephone while it
is ringing.
The external telephone rings.
Sets the number of incoming rings before the machine answers.
(1TIMES–16TIMES (2TIMES))
The external telephone does not ring. (In the Sleep mode, the
external telephone may ring one or two times.)
Sets whether to use remote receiving. (See Chapter 4, "Sending
and Receiving," in the Reference Guide.)
The machine enables remote receiving.
You can dial a code on remote extension to start receiving a
document.
A combination of two characters using 0 to 9. (default: 25)
The machine disables remote receiving.
Sets whether to store all received pages in memory before
printing them out or print each page as it is received. (See
Chapter 4, "Sending and Receiving," in the Reference Guide.)
Prints after all the pages of the document are received.
Prints each page as it is received.