Canon ColorPASS-Z5000 Getting Started page 94

4. When you have added all the information, click Add.
5. With the device name (5000) selected in the Devices list, click OK.
6. With the device name (5000) selected in the list of Available Servers, click Select to
Device name of the ColorPASS
(5000)
T
O MODIFY THE CONFIGURATION
1. To edit information for a ColorPASS in the list of available servers, select the
2. To add a new ColorPASS to the list of available servers, click Add. Configure the Add
3. To remove a ColorPASS from the list of available servers, select the ColorPASS by its
72 Installing User Software on a Mac OS Computer
—Enter the IP address (or DNS or hosts name) of the ColorPASS.
Server Name
—Enter the name of the device the ColorPASS is connected to:
New Device
device name appears in the Printer Setup section of the Configuration page.
The ColorPASS appears in the list of available servers. The first line of the entry
displays the nickname you gave the server, followed by the protocol. The second line
displays the device name.
begin using ColorWise Pro Tools.
Modifying the configuration
You should edit the configuration whenever there is any change in your original
configuration, such as a change of IP address. First, change the specific ColorPASS
Setup information before configuring the connection.
:
ColorPASS by its nickname and click Modify. Edit information in the Modify Server
Settings dialog box as necessary, and click OK when finished.
New Server dialog box as outlined in steps 3 through step 5 in the previous procedure.
nickname and click Remove.
5000 . This