Canon ColorPASS-Z5000 Getting Started page 53

31 Setting up PostScript printing with Windows NT 4.0 and/or Windows 2000
The Configure Standard TCP/IP Port Monitor dialog box appears.
10. If you have LPD printing enabled at the ColorPASS Control Panel, select LPR for
Protocol and LPR Byte Counting Enabled under LPR Settings.
You can also proceed without selecting LPR Byte Counting Enabled under
N :
OTE
LPR settings.
11. If you have Port 9100 printing enabled at the ColorPASS Control Panel, select Raw.
9100 is automatically detected for Port Number under Raw Settings. You can print to
the printer connection selected for Port 9100 printing at the ColorPASS Control
Panel.
12. Enter the queue name.
For LPR, use print, hold, or direct.
For Port 9100, you need to manually enter the following port numbers for each print
connection under Raw Settings:
direct: 9100 (default) or 9101
print: 9102
hold: 9103
This name is case-sensitive; type it exactly as shown above.
N :
OTE
13. Click OK to close the Configure Standard TCP/IP Port Monitor dialog box.