Canon ColorPASS-Z5000 Getting Started page 89

67 Setting up the ColorPASS as a PostScript printer
T C PASS
O SET UP THE OLOR
1. Select Chooser from the Apple menu.
Make sure AppleTalk is set to Active.
2. Select the correct AppleTalk Zone, if necessary.
3. Click the AdobePS icon.
The ColorPASS appears in the Select a PostScript Printer list in the form of
<server name>_<device name>_<print connection>. The device name (5000) is
the internal name of your copier.
Only the print connections (Direct, Hold, and Print) that have been enabled
N :
OTE
in Setup appear in the Chooser.
4. Select a ColorPASS connection from the "Select a PostScript Printer" list, and
click Create.
The AdobePS printer driver automatically selects the correct PPD file for your
ColorPASS.
You will need to set up each print connection separately. Repeat step 4 for all
N :
OTE
enabled connections.
5. In the Chooser list, an icon appears next to the newly installed ColorPASS; select it
and click Setup.
C :
IN THE HOOSER