Canon ColorPASS-Z5000 Getting Started page 77

4. When you have entered all the information, click Add.
5. With the device name (5000) selected in the Devices list, click OK.
Device name of the ColorPASS
(5000)
6. With the device name (5000) selected in the list of Available servers, click OK to
T
O MODIFY THE CONFIGURATION
1. To edit information for a ColorPASS in the list of available servers, select the
2. Edit information in the Modify Server Settings dialog box as necessary, and click OK
3. To add a new ColorPASS to the list of available servers, click Add. Configure the Add
4. To remove a ColorPASS, select the ColorPASS by its nickname, and click Remove.
55 Using the software for the first time
The ColorPASS appears in the list of available servers. The first line of the entry
displays the nickname you gave the server, followed by the protocol you chose. The
second line displays the device name.
begin using the software.
Modifying the configuration
You should edit the configuration whenever there is any change to your ColorPASS
server or network, such as a server name or IP address. First change the specific
ColorPASS Setup information before configuring the connection.
:
ColorPASS by its nickname and click Modify.
when finished.
New Server dialog box as outlined in steps 3 through 5 in the previous procedure.