BNI IOL-104-011-K006 Netzwerkschnittstelle – digitaler Hub Benutzerhinweise zu dieser Anleitung Gültigkeit Mitgeltende Dokumente Verwendete Symbole und Konventionen Bedeutung der Warnhinweise Verwendete Fachbegriffe und Abkürzungen Sicherheitshinweise Bestimmungsgemäße Verwendung Vernünftigerweise vorhersehbare Fehlanwendung Allgemeine Sicherheitshinweise Lieferumfang, Transport und Lagerung Lieferumfang Transport Lagerbedingungen Produktbeschreibung...
Mitgeltende Dokumente Das allgemeine Warnsymbol in Verbindung mit dem Weitere Informationen zu diesem Produkt finden Sie unter Signalwort GEFAHR kennzeichnet eine Gefahr, die unmit- www.balluff.com auf der Produktseite z. B. in folgenden telbar zum Tod oder zu schweren Verletzungen führt. Dokumenten: –...
Sicherheitsvorschriften eingehalten werden. Einhaltung der technischen Spezifikationen und Anforde- Insbesondere muss der Betreiber Maßnahmen treffen, rungen und nur mit geeignetem Original Balluff Zubehör dass bei einem Defekt des Produkts keine Gefahren für verwendet wird. Personen und Sachen entstehen können.
1 × Beschriftungsschilder (BAM IA-XA-004-4x6-Y) – Montageanleitung Zubehör ist nicht im Lieferumfang enthalten und deshalb getrennt zu bestellen. Empfohlenes Zubehör finden Sie unter www.balluff.com auf der Produktseite. Transport ► Produkt in Originalverpackung bis zum Verwendungs- ort transportieren. Lagerbedingungen ► Produkt in Originalverpackung lagern.
BNI IOL-104-011-K006 Netzwerkschnittstelle – digitaler Hub Produktbeschreibung (Fortsetzung) Funktion LEDs der digitalen Eingänge (LED 0, Eingang Pin 4 und LED 1, Eingang Pin 2) Die IO-Link-Hubs verfügen über acht Eingangs-Ports mit insgesamt 16 Eingängen. Die Anbindung an die überge- Anzeige Bedeutung ordnete Masterbaugruppe erfolgt über das IO-Link-Proto- Gelb statisch Eingangssignal = 1 koll.
Einbau und Anschluss Einbau 5.2.2 IO-Link-Schnittstelle Abmessungen siehe Bild 4-1 auf Seite 8. Befestigungszubehör finden Sie unter www.balluff.com auf der Produktseite. ► Das Modul mit 3 × M4-Schrauben unter Verwendung Bild 5-1: Draufsicht auf M12-Stecker, A-codiert der Befestigungslöcher (siehe Bild 4-2 auf Seite 8) befestigen.
BNI IOL-104-011-K006 Netzwerkschnittstelle – digitaler Hub Einbau und Anschluss (Fortsetzung) Schirmung und Kabelverlegung Schirmung Der Anschluss an den übergeordneten IO-Link-Master erfolgt mit einem Standard-Sensorkabel. Die Anbindung von digitalen Sensoren an den beschriebe- nen Hub erfolgt mit standardisierten, ungeschirmten Sensorkabeln. Kabellänge Das IO-Link-Anschlusskabel darf max.
BNI IOL-104-011-K006 Netzwerkschnittstelle – digitaler Hub Inbetriebnahme und Betrieb Inbetriebnahme Reinigung Das Produkt darf nur in ausgeschaltetem Zustand gereinigt werden. GEFAHR Unkontrollierte Systembewegungen ► Das Produkt regelmäßig reinigen. Bei der Inbetriebnahme und wenn das BNI-Modul Teil Die Reinigungsintervalle hängen von den Umgebungsbe- eines Regelsystems ist, dessen Parameter noch nicht dingungen und der Häufigkeit der Nutzung ab.
BNI IOL-104-011-K006 Netzwerkschnittstelle – digitaler Hub IO-Link-Konfiguration Das Modul muss in die Steuerung eingebunden werden. Dazu dient die entsprechende IODD-Datei. Die IODD kann kostenlos unter www.balluff.com heruntergeladen werden. Nachfolgend werden Parameter zur notwendigen Konfigu- ration des digitalen Hubs beschrieben. Prozessdatenprofil PDInput (2 Byte)
BNI IOL-104-011-K006 Netzwerkschnittstelle – digitaler Hub IO-Link-Konfiguration (Fortsetzung) 7.2.3 Parameterdaten – ISDU Name Index Sub- Zugriff Länge Datentyp Data Default index Storage Invertierung der Ein- 0x0040 (64) 1…16 2 Byte BOOL gänge Spannungsüberwa- 0x0044 (68) 1…9 2 Byte BOOL – chung Seriennummer 0x0054 (84) 16 Byte...
Page 17
BNI IOL-104-011-K006 Netzwerkschnittstelle – digitaler Hub IO-Link-Konfiguration (Fortsetzung) Fehlercodes Fehlercode Beschreibung 0x8011 Index not available 0x8012 Subindex not available 0x8023 Access denied 0x8033 Parameter length overrun 0x8034 Parameter length underrun 0x8035 Function not available Tab. 7-4: Fehlercodes Events Event-Code Beschreibung...
Page 18
BNI IOL-104-011-K006 Netzwerkschnittstelle – digitaler Hub IO-Link-Funktionen Das IO-Link-Gerät unterstützt die in diesem Kapitel aufge- führten Funktionen. IO-Link Version 1.0 / 1.1 Dieses Device kann mit einem IO-Link-Master nach der IO-Link-Version 1.0 sowie Version 1.1 betrieben werden. Versionspezifische Funktionen (wie z. B. Datenhaltung nur in Version 1.1) werden nur in Verbindung mit einem geeig-...
Page 19
BNI IOL-104-011-K006 Netzwerkschnittstelle – digitaler Hub Reparatur, Demontage und Entsorgung Reparatur Reparaturen am Produkt dürfen nur von Balluff durchge- führt werden. Sollte das Produkt defekt sein, nehmen Sie Kontakt mit unserem Service-Center auf. Demontage ► Gerät nur in spannungsfreiem Zustand demontieren! Entsorgung ►...
Page 20
Die Angaben sind typische Werte bei 24 V DC und Raum- 10.7 Zulassungen und Kennzeichnungen temperatur. File: E319845 Das Modul ist sofort betriebsbereit. Enclosure rating: Type 1 Weitere Daten finden Sie unter www.balluff.com Ambient temperature: 50 °C auf der Produktseite. Supply from Class 2 source 10.1 Umgebungsbedingungen Mit dem CE-Zeichen bestätigen wir,...
Page 23
BNI IOL-104-011-K006 Network interface – Digital hub User instructions for this guide Validity Other applicable documents Symbols and conventions Explanation of the warnings Technical terms and abbreviations used Safety notes Intended use Reasonably foreseeable misuse General safety notes Scope of delivery, transport and storage...
Page 24
BNI IOL-104-011-K006 Network interface – Digital hub Repair, disassembly and disposal Repair Disassembly Disposal Technical data 10.1 Ambient conditions 10.2 Electrical data 10.3 Electrical connection 10.4 Interface 10.5 Materials 10.6 Mechanical features 10.7 Approvals and markings english...
Validity Explanation of the warnings This guide provides all the necessary information for the Always observe the warnings in this guide and the safe use of the following Balluff network interfaces: measures described to avoid hazards. – BNI IOL-104-011-K006 The warnings used here contain various signal words and...
Network interface – Digital hub Safety notes Intended use General safety notes The Balluff network interface BNI IOL-104-011-K006 is Activities such as installation, connection and startup intended for use as a decentralized hub module for the may only be carried out by qualified personnel.
Installation guide Accessories are not included in the scope of delivery and must be ordered separately. Recommended accessories can be found at www.balluff.com on the product page. Transport ► Transport product to location of use in original packaging. Storage conditions ►...
Page 28
BNI IOL-104-011-K006 Network interface – Digital hub Product description M12×1 (8x) M12×1 Fig. 4-1: Dimensions Construction 1 Mounting hole 2 IO-Link interface 3 Standard input port 1 4 Standard input port 3 5 Status LED 1: Input (Pin 2) 6 Standard input port 5 7 Status LED 0: Input (Pin 4)
BNI IOL-104-011-K006 Network interface – Digital hub Product description (continued) Function LEDs of the digital inputs (LED 0, input Pin 4 and LED 1, input Pin 2) The IO-Link hubs have eight input ports with a total of 16 inputs. The connection to the higher-level master module is...
5.2.2 IO-Link interface For dimensions, see Fig. 4-1 on page 8. You can find mounting accessories under www.balluff.com on the product page. ► Fasten the module with 3 × M4 screws using the Fig. 5-1: Top view of M12 plug, A-coded mounting holes (see Fig. 4-2 on page 8).
BNI IOL-104-011-K006 Network interface – Digital hub Installation and connection (continued) Shielding and cable routing Shielding The connection to the higher-level IO-Link master is made with a standard sensor cable. Digital sensors are connected to the described hub using standardized, unshielded sensor cables.
BNI IOL-104-011-K006 Network interface – Digital hub Startup and operation Startup Cleaning The product may only be cleaned when switched off. DANGER ► Clean the product regularly. Uncontrolled system movement The cleaning intervals depend on the ambient conditions When starting up, if the BNI module is part of a closed and the frequency of use.
BNI IOL-104-011-K006 Network interface – Digital hub IO-Link Configuration The module must be integrated into the control system. The corresponding IODD file is used for this. The IODD can be downloaded free of charge from www.balluff.com. The section below describes parameters for the necessary configuration of the digital hub.
BNI IOL-104-011-K006 Network interface – Digital hub IO-Link configuration (continued) 7.2.3 Parameter data – ISDU Name Index Subin- Access Length Data Data Default Type Storage Inversion of inputs 0x0040 (64) 1…16 2 bytes BOOL Voltage monitoring 0x0044 (68) 1…9 2 bytes BOOL –...
BNI IOL-104-011-K006 Network interface – Digital hub IO-Link configuration (continued) Error codes Error code Description 0x8011 Index not available 0x8012 Subindex not available 0x8023 Access denied 0x8033 Parameter length overrun 0x8034 Parameter length underrun 0x8035 Function not available Tab. 7-4:...
BNI IOL-104-011-K006 Network interface – Digital hub IO-Link functions The IO-Link device supports the functions listed in this chapter. IO-Link Version 1.0 / 1.1 This device can be operated with an IO-Link master after IO-Link Version 1.0 and Version 1.1. Version-specific functions (such as Date retention only in Version 1.1) are only supported in connection with a...
Page 37
BNI IOL-104-011-K006 Network interface – Digital hub Repair, disassembly and disposal Repair Repairs to the product may only be performed by Balluff. If the product is defective, contact our Service Center. Disassembly ► Only disassemble the device when it is de-energized! Disposal ►...
Page 38
10.7 Approvals and markings temperature. File: E319845 The module is immediately ready for use. Enclosure rating: Type 1 Further data can be found at www.balluff.com Ambient temperature: 50 °C on the product page. Supply from Class 2 source 10.1 Ambient conditions The CE Mark verifies that our products...
Page 40
Americas Service Center Asia Pacific Service Center Poland Greater China Balluff Sp. z o.o. Balluff Inc. Balluff Automation (Shanghai) Co., Ltd. Ul. Graniczna 21A 8125 Holton Drive No. 800 Chengshan Rd, 8F, Building A, 54-516 Wrocław Florence, KY 41042 Yunding International Commercial Plaza...
Need help?
Do you have a question about the BNI IOL-104-011-K006 and is the answer not in the manual?
Questions and answers