Installation In A Fireplace - Palazzetti ECOPALEX GTM70 Installation And Maintenance Manual

In accordance with local regulations in force,
there are two possible configurations for the
combustion air intake:
• (Fig. 14): external air intake (c) channelled to the
fire box. Lower grate (a) supplied for the recir-
culation of ambient air on the cladding;
C D
A
Product images are for illustrative purposes only
• (Fig. 15): air intake (F) on the cladding, chan-
nelled to the hearth. Lower grate (a) supplied
on the cladding and wall hole (B) for the recir-
culation of ambient air.
B D
F
Product images are for illustrative purposes only
52
• Fig. 16: lower grille (a) provided in the cladding
and external air intake (B) for the recirculation
of ambient air to be created inside or outside
the cladding.
E
Product images are for illustrative purposes only
The Ecopalex features, on the back, a pipe (D) for
the combustion air inlet.
Fig. 14
On the top part of the cladding, it is necessary
to place the heat recovery grille (e), not supplied.

7.8 Installation in a fireplace

First of all, place the appliance on the fire bed of
the fireplace. Spread a line of fire-sealant paste
(resistant to 800°C) on the bottom of the collar
(at the top). Then move the appliance to its final
position. This sliding movement can be facilitated
by using two sheet metal guides, not supplied,
E
2/3 mm thick, placed under the appliance, which
will then be removed after the appliance has
been positioned.
A
Fig. 15
B D
A
004778990 - 11/02/2022
E
Fig. 16