Panasonic SC-EN38GCS Service Manual page 38

SC-EN38GCS
9.17. Disassembly of CD Servo
P.C.B.
• Follow the (Step 1) - (Step 3) of item 9.4.
• Follow the (Step 1) - (Step 3) of item 9.7.
• Follow the (Step 1) - (Step 10) of item 9.8.
• Follow the (Step 1) - (Step 2) of item 9.15.
• Follow the (Step 1) - (Step 4) of item 9.16.
Step 1 : Desolder the terminal.
Step 2 : Remove 3 screws.
Step 3 : Flip the CD Servo P.C.B. over to one side.
Step 4 : Detach FFC out from the connector.
Step 5 : Attach a short pin to the unit.
Caution : Insert a short pin into FFC of the optical pickup.
[See "Handling Precautions for traverse unit"]
9.18. Disassembly of Motor Unit &
Motor P.C.B.
• Follow the (Step 1) - (Step 3) of item 9.4.
• Follow the (Step 1) - (Step 3) of item 9.7.
• Follow the (Step 1) - (Step 10) of item 9.8.
Step 1 : Remove 2 screws.
Step 2 : Remove motor assembly.
• Disassembly of motor assembly (gears & belt)
Step 3 : Remove 2 screws.
38