Panasonic SC-EN38GCS Service Manual page 26

Table of Contents

SC-EN38GCS

Step 6 : Remove USB bottom case as arrow shown.

Step 7 : Unsolder the solder point to remove USB P.C.B..

9.7.

Disassembly of Tuner P.C.B.

• Follow the (Step 1) - (Step 3) of item 9.4.

Step 1 : Remove 2 screws.

Step 2 : Detach 12P FFC cable at connector (CN1) on Tuner

P.C.B..

Step 3 : Remove Tuner P.C.B..

Caution : Take extra care for the locator on the Tuner

P.C.B. during removal and assembly of the Tuner P.C.B..

• Disassembly of Tuner Shield

Step 4 : Desolder 4 solder point from Tuner P.C.B. to remove

Tuner Shield.

Table of Contents