Panasonic SC-EN38GCS Service Manual page 16

SC-EN38GCS
Mode Name
Volume Setting To check for the volume setting of the
Mode main unit. The volume will be
automatically set to its respective
level (in dB). During the mode,
treble/bass/EQ will be set to "0" dB &
OFF.
CD Loading Test To determine the reliability of CD
Mode Loading unit.
To check for the Open/Close
operation for the CD loading unit. It
fails when there is abnormality in
opening or closing.
CD Traverse Unit To check for the traverse unit
Test Mode operation. In this mode, the first & last
track is access & read. (TOC). It fails
when TOC is not completed by IOS or
the traverse is out of focus.
CD Combination A combination of CD loading &
Test Mode traverse unit test.
CD Auto To display result of self adjustment for
Adjustment CD.
Display For more information, please refer to
Section 8.2.1.
Cold Start To activate cold start upon next AC
power up.
Item
Description
FL Display
The counter will increment by 1 until reach
9999999
↓
The counter will increment by 1 until reach
9999999
↓
The counter will increment by 1 until reach
9999999
↓
The [NO DISC] display will appear after 3s,
The [NO DISC] display will appear after 3s,
16
Key Operation
Front Key
In doctor mode:
1. Press [7] button on remote control.
2. Press [8] button on remote control.
3. Press [9] button on remote control.
To exit, press [ ] button on
main unit or remote control.
In doctor mode:
1. Press [ ], [1] & [1] button on
remote control.
To cancel, press [0] button remote
control.
To exit, press [ ] button on
main unit or remote control.
In doctor mode:
1. Press [ ], [1] & [2] button on
remote control.
To cancel, press [0] button remote
control.
To exit, press [ ] button on
main unit or remote control.
In doctor mode:
1. Press [ ], [1] & [3] button on
remote control.
To cancel, press [0] button remote
control.
To exit, press [ ] button on
main unit or remote control.
In doctor mode:
1. Press [ ], [1] & [4] button on
remote control.
To cancel, press [0] button remote
control.
To exit, press [ ] button on
main unit or remote control.
In doctor mode:
1. Press [SLEEP] button on remote
control.
To exit, press [ ] button on
main unit or remote control.