Double Feed - Canon imageFORMULA DR-M140 User Manual

2
The settings screen for the scanner driver appears.
p. 50)
3
Click the [Feeding] tab.
4
Select either the [Detect by Length] or the [Detect by
Ultrasonic] check box (or both).
5
To use the double feed detection ignore function, open
the [Others] tab and select the [Rapid recovery system]
check box.
6
(See Click the [OK] button and close the settings screen.
7
Place the document as described in the
Documents"
What to do when a double feed is
detected
When not using the double feed detection ignore function
If a document double feed is detected during scanning, document
feeding stops when the double fed documents are ejected. When this
happens, the following error code is displayed in the Job No. Indicator
of the operating panel.
Also, a message screen is displayed to notify you that a double feed
has been detected. For example, the following screen is displayed in
CapturePerfect.
When this happens, stop the scanning in the application and then
scan the documents again.
32
procedure on p. 27.
Double feed detection error code
"Placing