Canon imageFORMULA DR-M140 User Manual page 34

4
Select the [Skew Detection] check box.
5
Click the [OK] button to close the settings screen.
6
Place the document as described in
Documents" (see p. 27).
IMPORTANT
When this function is enabled, small documents and documents
that have been placed to the left or right of the center of the feed
inlet may be detected as skewed, and the scanning operation
may stop. Place documents in the center of the feed inlet, or
disable the skew detection function.
When a skewed document is detected
Feeding automatically stops when a skewed document is detected
during scanning. The following error code is also displayed in the Job
No. Indicator of the operating panel.
Also, a message screen is displayed to notify you that a skewed
"Placing
document has been detected.
If [Rapid recovery system] is enabled in the [Others] tab of the
scanner driver settings screen, the following screen appears instead
of the above message screen. In such cases, reload the document
and click [Yes] to continue scanning.
34
Skew detection error code
Hint