Table of Contents
Advertisement
Packet Filter
You can filter the packages by MAC address, IP address, Protocol, Port number and Application or
URL.
Packet Filter - IP & MAC Filter
Packet Filter
Filter Type: There are three types IP & MAC Filter and URL Filter that user can select for this filter
rule. Here we set IP & MAC Filter.
IP & MAC Filter Editing
Action: This is how to deal with the packets matching the rule. Allow please select White List or block
selecting Black List.
Rule Index: This is item number
Individual Active: Select Yes to activate the rule.
Interface: Select to determine which interface the rule will be applied to.
Direction: Select to determine whether the rule applies to outgoing packets, incoming packets or
packets of both directions.
Type: Choose type of field you want to specify to monitor. Select IPv4 for IPv4 address, port number
and protocol. Select IPv6 for IPv6 address, port number and protocol. Select MAC for MAC address.
Source IP Address: The source IP address of packets to be monitored. 0.0.0.0 means Don't care.
113
Advertisement
Table of Contents
