Knowing When to Replace Ink Tank
If an ink tank needs replacing, the POWER
flash four times, as soon as printing begins. It is important to quickly identify the
empty tank using the BJ Status Monitor (Windows) or error messages (Macintosh) and
replace it.
Note
The following message appears when an ink is empty. Printing will resume as soon as the
ink tank is replaced and the front cover is closed.
Empty ink tank
Note
Should missing characters or white streaks appear despite
sufficient ink levels, refer to the section "When Printing Becomes
Faint or Colors are Incorrect" on page 43.
Faint or Colors are Incorrect
Faint or Colors are Incorrect
Faint or Colors are Incorrect
When Low Ink is Detected
The BJ Status Monitor appears as soon as a print job starts. [!] indi-
cates a low ink level. Obtain a replacement tank as soon as possi-
ble.
POWER lamp will change from green to orange and
POWER
POWER
The ink tank with [X] symbol is out of ink.
Replace with a new ink tank.
• Press the RESUME/CANCEL
RESUME/CANCEL button to
RESUME/CANCEL
RESUME/CANCEL
resume printing with an empty ink tank.
When printing is finished, replace the ink
tank immediately. If you continue printing
with an empty ink tank, problems may
occur.
• Menu screens will vary to some degree,
depending on your software environment.
Click Cancel Printing
Cancel Printing to cancel
Cancel Printing
Cancel Printing
the current print job.
Ink tank with low ink level
Printing Maintenance
When Printing Becomes
When Printing Becomes
When Printing Becomes
39