Knowing When To Replace Ink Tank; Replacing Ink Tanks - Canon PIXMA iP6600D Series Direct Printing Manual

Knowing When to Replace Ink Tank

If an ink tank needs replacing, the Alarm
LCD.
Ink is low: The Ink is low Ink is low Ink is low symbol appears above an ink tank that is low.
Low ink tank
Ink is out: The Ink is out symbol appears above an empty ink tank.
Ink is out Ink is out
Empty ink tank

Replacing Ink Tanks

When ink tanks run out of ink, replace them using the following steps.
1
Ensure that the printer is on.
2
Put your fingers in the notches in either side of the paper output tray and pull
down to open it.
3
Open the cover, and then the inner cover forward to open it.
The print head holder moves to the center.
If the cover is opened more than ten minutes, the print head holder moves to
the right side. Close and reopen the cover to return the holder to the center.
Alarm lamp lights. Confirm the message displayed on the
Alarm Alarm
When printing starts, the message is displayed on the LCD. Obtain a
replacement tank as soon as possible.
• To continue printing, select Yes
• To cancel printing, select No
• If printing has not finished, you can continue printing for a while by
pressing the OK OK button with the empty ink tank installed. However,
OK OK
you will need to replace it with a new one as soon as printing
finishes. If you continue printing with an empty ink tank, it may
damage the printer.
*Printing does not resume if any of the ink tanks are removed. Be
sure to press the OK
• Press the Stop/Reset Stop/Reset button to cancel printing. Replace the ink tank
Stop/Reset Stop/Reset
with a new one.
Yes and then press the OK Yes Yes
No and then press the OK
No No
OK button with the ink tanks installed. OK OK
OK button. OK OK
OK button.
OK OK
51