This specification is applicable to TSC-34/U-L. 1-2. Overview TSC-34/U-L is a touch screen controller board that performs an A/D conversion of an analog signal of a 4 wire resistive touch screen, and transmits the coordinate data to the host in a 10-bit resolution via USB interface.
X-coordinates electric circuits and the other as a Y-coordinates circuits. X-coordinates TSC-34/U-L supplies voltage, Vcc to the one of X-coordinates electrodes with GND to the other. When the touch screen is pressed under this environment the voltage of the X-coordinates resis- tance is detected by the Y-coordinates electrode (A_in) at the input point (x1), where the X-Y coordinate resistance layers make contact.
(6) 130p/s (7) 150p/s The value will be lower in the active 10bit (1024 x 1024) area of the touch screen ±3 LSB 10ms (TYP) TSC-34/U-L User’s Guide Remarks No dew condensation No dew condensation 150p/s, Vin=Vbus, Touch screen is activated.
4. Packing Specification 4-1. Outline TSC-34/U-L is wrapped up in the air packing of the prevention of static protection type and puts it in a packing box. 4-2. Packing material Outer case: 75 x 55 x 15 mm, clay coated newsback board...
4-4. Product name label Backside of board TSC-34/U-L Document No. DER-S0045A TSC-34/U-L User’s Guide TSC-34/U-L: Product name Lot#: 7J20 7: the last digits of the year J: Month Jan : A Feb : B Mar : C Apr : D...
Need help?
Do you have a question about the TSC-34/U-L and is the answer not in the manual?
Questions and answers