5� Power On The Doorbell; 6� Check The Linkage - Ezviz DB2 Pro Manual

5� Power On the Doorbell
1. Short press the power button for 2 seconds to turn on the doorbell.
The doorbell LED indicator goes out after turning blue for 3 seconds, indicating that the doorbell is turned on.
If the doorbell is out of battery, connect it to power outlet with the power adapter (5V 2A, purchase separately) for charging.
It is recommended to fully charge the doorbell before you use it for the first time.
• When charging, the doorbell will automatically turn on.
• If you use a 5V 2A adapter to charge the doorbell, it will take about 4.5 hours to fully charge.
• If the doorbell is installed outdoors, please use waterproof power cable to charge.
• When charging the doorbell, make sure the lens faces upward to aviod fraying the lens.
2. When the doorbell is turned on, it will connect to the network by automatically linking to the chime.
Make sure your Chime is placed as close to the Doorbell as possible for optimal performance.
Make sure your Chime is placed as close to the router as possable for optimal performance.
6� Check the Linkage
Press the doorbell button to check. If the chime rings indicating that the connection is successful.
Power Outlet
USB Cable
• When the doorbell is linked, the chime will give out reminders that there
are visitors or someone comes up if the doorbell is triggered.
• If the doorbell failed to connect to the network, please adjust the position
of the chime. It is recommended to put the chime and doorbell within 4
meters.
• If the chime failed to connect to the network, the doorbell beeps twice
and the chime LED indicator fast-flashing blue. Please check the
network and if the Wi-Fi password is correct.
• If the chime is connected to network but failed to registered to the
platform, the doorbell beeps twice and the chime LED indicator solid
blue. Please check the network and use your cell phone for help.
5