Axis P1445-LE User Manual page 7

AXIS P1445-LE-3 License Plate Verifier Kit
Get started
2. Select the image rotation that corresponds to how your camera is mounted.
3. Select the number of areas of interest. Note that one area can detect plates in both directions.
4. Select the region where the camera is located.
5. Select capture type.
- License plate crop saves only the license plate.
- Vehicle crop saves the entire captured vehicle.
- Frame downsized 480x270 saves the entire image and reduces the resolution to 480x270.
- Full frame saves the entire image at full resolution.
6. Drag the anchor points to adjust the area of interest. See Adjust the area of interest on page 10.
7. Adjust the direction of the area of interest. Click the arrow and rotate to set the direction. The direction determines how
the application registers vehicles entering or exiting the area.
8. Click Next
9. In the Protocol drop-down list, select one of the following protocols:
- TCP
- HTTP POST
10. In the Server URL field, type the server address and port in the following format: 127.0.0.1:8080
11. In the Device ID field, type the name of the device or leave as is.
12. Under Event types, select one or more of the following options:
- New means the first detection of a license plate.
- Update is either a correction of a character on a previously detected license plate, or when a a direction is
detected as the plate moves and is tracked across the image.
- Lost is the last tracked event of the license plate before it exits the image. It also contains the direction of
the license plate.
13. To turn on the feature, select Send event data to server.
14. To reduce bandwidth when using HTTP POST, you can select Do not to send images through HTTP POST.
15. Click Next.
16. If you already have a list of registered plates, choose to import as either a blocklist or allowlist.
17. Click Finish.
Access control
Use the setup wizard for quick and easy configuration. You can choose to Skip to leave the guide at any time.
1. Select Access control and click Next.
2. Select the type of access control to use:
- Internal I/O if you want keep list management in the camera. See Open a barrier for known vehicles using the
camera's I/O on page 19.
- Controller if you want to connect a Door controller. See Connect to a door controller on page 21.
7