Axis P1445-LE User Manual page 31

AXIS P1445-LE-3 License Plate Verifier Kit
The device interface
and it comes from the browser. Both values cover only the raw video stream and not the additional bandwidth
generated when it's transported over the network through UDP/TCP/HTTP.
• Adaptive stream: Turn on to adapt the image resolution to the viewing client's actual display resolution, to increase
the user experience and help prevent a possible overload of the client's hardware. The adaptive stream is only
applied when you view the live video stream in the web interface in a browser. When adaptive stream is turned on,
the maximum frame rate is 30 fps. If you take a snapshot while adaptive stream is turned on, it will use the image
resolution selected by the adaptive stream.
• Level grid: Click
to hide it.
• Pixel counter: Click
also define the pixel size of the box in the Width and Height fields.
• Refresh: Click
Click to show the live view at full resolution. If the full resolution is larger than your screen size, use the smaller image to
navigate in the image.
Click to show the live video stream in full screen. Press ESC to exit full screen mode.
Installation
Capture mode
the capture mode, it can affect many other settings, such as view areas and privacy masks.
Mounting position
Power line frequency: Select the frequency that is used in your region to minimize image flicker. The American regions
usually use 60 Hz. The rest of the world mostly uses 50 Hz. If you're not sure of your region's power line frequency, check
with the local authorities.
Rotate: Select the preferred image orientation.
Zoom: Use the slider to adjust the zoom level.
Autofocus area: Click
Autofocus: Click to make the camera focus on the selected area. If you don't select an autofocus area, the camera focuses
on the entire scene.
Reset focus: Click to make the focus return to its original position.
Focus: Use the slider to set the focus manually.
Image correction
to show the level grid. The grid helps you decide if the image is horizontally aligned. Click
to show the pixel counter. Drag and resize the box to contain your area of interest. You can
to refresh the still image in the live view.
: A capture mode is a preset configuration that defines how the camera captures images. When you change
: The orientation of the image can change depending on how the camera is mounted.
to show the autofocus area. This area should include the area of interest.
31