Axis P1445-LE User Manual page 60

AXIS P1445-LE-3 License Plate Verifier Kit
The device interface
Important
The only settings saved after restore are:
• Boot protocol (DHCP or static)
• Static IP address
• Default router
• Subnet mask
• 802.1X settings
• O3C settings
Factory default: Return all settings to the factory default values. Afterwards you must reset the IP address to make the device
accessible.
Note
All Axis device firmware is digitally signed to ensure that you only install verified firmware on your device. This further
increases the overall minimum cybersecurity level of Axis devices. For more information, see the white paper "Signed
firmware, secure boot, and security of private keys" at axis.com.
Firmware upgrade: Upgrade to a new firmware version. New firmware releases can contain improved functionality, bug
fixes, and completely new features. We recommend you to always use the latest release. To download the latest release, go
to axis.com/support.
When you upgrade, you can choose between three options:
• Standard upgrade: Upgrade to the new firmware version.
• Factory default: Upgrade and return all settings to the factory default values. When you choose this option, you can't
revert to the previous firmware version after the upgrade.
• Autorollback: Upgrade and confirm the upgrade within the set time. If you don't confirm, the device reverts to the
previous firmware version.
Firmware rollback: Revert to the previously installed firmware version.
Optics
Temperature compensation: Turn on if you want the focus position to be corrected based on the temperature in the optics.
IR compensation: Turn on if you want the focus position to be corrected when IR-cut filter is off and when there is IR light.
Calibrate zoom and focus: Click to reset the optics and the zoom and focus settings to the factory default position. You need to
do this if the optics have lost calibration during transport, or if the device has been exposed to extreme vibrations.
60