Axis P1445-LE User Manual page 35

AXIS P1445-LE-3 License Plate Verifier Kit
The device interface
• Manual
the camera to interpret as white in the live view image. Use the Red balance and Blue balance sliders to adjust the
white balance manually.
Day-night mode
IR-cut filter:
• Auto: Select to automatically turn on and off the IR-cut filter. When the camera is in day mode, the IR-cut filter
is turned on and blocks incoming infrared light, and when in night mode, the IR-cut filter is turned off and the
camera's light sensitivity increases.
• On: Select to turn on the IR-cut filter. The image is in color, but with reduced light sensitivity.
• Off: Select to turn off the IR-cut filter. The image is in black and white for increased light sensitivity.
Threshold: Use the slider to adjust the light threshold where the camera changes from day mode to night mode.
• Move the slider towards Bright to decrease the threshold for the IR-cut filter. The camera changes to night mode
earlier.
• Move the slider towards Dark to increase the threshold for the IR-cut filter. The camera changes to night mode later.
IR light
If your device doesn't have built-in illumination, these controls are only available when you have connected a supporting Axis
accessory.
Allow illumination: Turn on to let the camera use the built-in light in night mode.
Synchronize illumination: Turn on to automatically synchronize the illumination with the surrounding light. The synchronization
between day and night only works if the IR-cut filter is set to Auto or Off.
Automatic illumination angle
Illumination angle
from the camera's angle of view. If the camera has a wide angle of view, you can set the illumination angle to a narrower angle,
which equals a greater tele position. This will result in dark corners in the image.
IR wavelength
White light
Allow illumination
Synchronize illumination
Exposure
: Fix the white balance with the help of a white object. Drag the circle to an object that you want
: Turn on to use the automatic illumination angle.
: Use the slider to manually set the illumination angle, for example if the angle needs to be different
: Select the desired wavelength for the IR light.
: Turn on to let the camera use white light in night mode.
: Turn on to automatically synchronize the white light with the surrounding light.
35