Axis P1445-LE User Manual page 55

AXIS P1445-LE-3 License Plate Verifier Kit
The device interface
• Media encryption (only with transport mode TLS): Select the type of encryption for media (audio and video) in SIP calls.
• Certificate (only with transport mode TLS): Select a certificate.
• Verify server certificate (only with transport mode TLS): Check to verify the server certificate.
• Secondary SIP server: Turn on if you want the device to try to register on a secondary SIP server if registration
on the primary SIP server fails.
• Answer automatically: Select to automatically answer an incoming call.
• SIP secure: Select to use Secure Session Initiation Protocol (SIPS). SIPS uses the TLS transport mode to encrypt traffic.
• Proxies
-
-
-
-
-
• Video
-
-
-
• DTMF
-
-
-
-
-
SIP test call
SIP account: Select which account to make the test call from.
SIP address: Enter a SIP address and click
Stream profiles
Click to create and save groups of video stream settings. You can use the settings in different situations, for example in
continuous recording or when you use action rules to record.
ONVIF
ONVIF users
Proxy: Click to add a proxy.
Prioritize: If you have added two or more proxies, click to prioritize them.
Server address: Enter the IP address of the SIP proxy server.
Username: If required, enter the username for the SIP proxy server.
Password: If required, enter the password for the SIP proxy server.
View area: Select the view area to use for video calls. If you select none, the native view is used.
Resolution: Select the resolution to use for video calls. The resolution affects the required bandwidth.
Frame rate: Select the number of frames per second for video calls. The frame rate affects the required
bandwidth.
Use RTP (RFC2833): Select to allow dual-tone multifrequency (DTMF) signaling, other tone signals and
telephony events in RTP packets.
Use SIP INFO (RFC2976): Select to include the INFO method to the SIP protocol. The INFO method adds
optional application layer information, generally related to the session.
DTMF sequence: Click to add an action rule triggered by touch-tone. You must activate the action
rule in the Events tab.
Sequence: Enter the characters to trigger the action rule. Allowed characters: 0–9, A-D, #, and *.
Description: Enter a description of the action to be triggered.
to make a test call and verify that the account works.
55