Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Dynalink 56K e-modem II
Summary of Contents for Dynalink 56K e-modem II
- Page 1 56K e-modem II Quick Setup Guide 1456VQE-C2...
- Page 2 56K e-modem II Quick Set-up Guide Introduction This Quick Setup Guide summarises the modem installation in four simple steps. Please follow each step exactly as described. Upon completion of step 4 you can be certain that your modem is correctly installed.
- Page 3 Connect the modem to your PC 1. Turn your PC OFF. 2. Connect the grey serial cable to both the modem and a spare COM port found on the back of the PC. 3. Connect the enclosed phone cable to the modem LINE jack and a phone wall socket. 4.
- Page 4 Internet and setting up an e-mail account. Once you are connected to the Internet, you will find further information on Dynalink Modem’s World Wide Web site at www.dynalink.com.au/support (Australia) or www.dynalink.co.nz/support (NZ). Here you can learn how to setup the BVRP ®...
- Page 5 The Internet When following Step 4, the modem is not listed under “Modem Properties”. This error can occur when the drivers have not been installed correctly. Click Start – Settings - Control Panel – System – Device Manager Check under Other Devices. If there is a reference to a modem, highlight it then click Remove.
- Page 6 Return delivery after repair will be paid for by Dynalink. We reserve the right not to repair or replace goods that: have been mishandled, abused or not installed according to the guidelines as outlined in the instructions.
Need help?
Do you have a question about the 56K e-modem II and is the answer not in the manual?
Questions and answers