Canon Optura Pi Instruction Manual page 103

#5_OPTURA Pi_E(100-126)
Installing the backup battery
E
Pull out the battery holder from the
base of the camera, and insert the
CR2025 lithium battery with the + side
facing upwards. Click the holder back
into place.
• You may find it useful to use a small
screwdriver to ease out the battery
holder.
This backup battery allows the camera to remember the date and time and other
settings when main power source is removed. It has a life span of about a year.
When it needs replacing (or if it has not been installed), the
display. Make sure to attach a power source to the camera first, so it will
remember your chosen settings when you change the battery.
DANGER!
Treat the battery pack with care.
• Keep it away from fire (or it might explode).
• Do not expose the battery pack to temperatures greater than 140°F (60°C).
Do not leave it near a heater, or inside a car in hot weather, for example.
• Do not try to disassemble or modify it.
• Do not drop or knock it.
• Do not get it wet.
WARNING!
• The battery used in this device may present a fire or chemical burn hazard if
mistreated. Do not recharge, disassemble, heat above 212°F (100°C) or
incinerate.
• Replace the battery with a Sony, Sanyo or Panasonic CR2025, or Duracell
DL2025. Use of another battery may present a risk of fire or explosion.
Cautions:
• Do not pick up the battery using tweezers or other metal tools — this will cause
a short circuit.
• Wipe the battery with a clean, dry cloth to ensure proper contact.
• Keep the battery pack out of reach of children — if it is swallowed, contact a
physician immediately, as the battery case may break down and the battery
fluids damage the stomach and intestines.
• Do not disassemble, heat or immerse the battery in water, to avoid the risk of
explosion.
104
1/25/00 13:43 Page 104 (1,1)
y mark flashes in the